For more detailed information, download the "Product Map"

Basic configuration of the model:

• The entire structure is made of AISI-304 acid-resistant steel.
• Two injection heads of a new generation - 212 single needles.
• Standard head with one set of needles to choose from Ø 2; 2.5; 3; 3.5; 4 mm.
• The possibility of injecting raw materials with a thickness of 200 mm.
• Three speeds of the injection head.
• A system for cleaning the inside of the head that does not require disassembly.
• Rotating filter - FBN-700.
• Servo drive of the injection head and conveyor.
• Synchronization of the servo drive of the conveyor with the servo drive of the head.
• A rotating table for washing injector and filter elements.
• An internal filter with a variable gradation, selected depending on the diameter of the needles (in the standard version of the machine, one filter is selected for the selected set of needles).
• System of continuous measurement of brine temperature.
• Smooth adjustment of the opening and closing of the brine valves.
• Self-diagnostics.
• Touch control panel 7.5''

All injection processes are programmed and controlled using a designed and easy-to-maintain panel, the use of which allows full control of all injector parameters.

• The possibility of programming the level of the beginning and end of the injection;
• Ability to record up to 99 programs;
• Choice of injection during head movement: down; down-up; down + time; any point in the injection zone;
• Programmed languages: EN/ES/RU/PL;
• Setting the conveyor speed;
• Brine pressure: up to 4.5 bar (smooth adjustment);
• Continuous measurement of brine temperature

• Speed of the head during injection (smooth adjustment);
• Checking the moment and duration of injection;
• Ability to program conveyor speed;
• Lower and upper position of the injecting heads and the tenderizing head;
• Smooth adjustment of the height of the colliding beam;
• Programming of the elasticity of the needles depending on the injected raw material.