Injector MH-700 SAS

4. Basic configuration of the model:
4.1. The entire structure is made of AISI-304 acid-resistant steel.
4.2. Two injection heads of the new generation - 700 single needles of 350 pieces on one head, which work independently of each other.
Standard head with one set of needles to choose from Ø 2; 2.5; 3; 3.5; 4 mm.
4.3. The possibility of injecting raw materials with a thickness of 200 mm.
4.4. Three speeds of the injection head.
4.5. A system for cleaning the inside of the head that does not require disassembly.
4.6. Rotating filter - FBN-700.
4.7. Servo drive of the injection head and conveyor.
4.8. Synchronization of the servo drive of the conveyor with the servo drive of the head.
4.9. A rotating table for washing injector and filter elements.

4.10. An internal filter with a variable gradation, selected depending on the diameter of the needles (in the standard version of the machine, one filter is selected for the selected set of needles).
4.11. System of continuous measurement of brine temperature.
4.12. Smooth adjustment of the opening and closing of the brine valves.
4.13. Self-diagnostics.
4.14. Touch control panel 7.5''
All injection processes are programmed and controlled using a designed and easy-to-maintain panel, the use of which allows full control of all injector parameters.

 

• The possibility of programming the level of the beginning and end of the injection;
• Ability to record up to 99 programs;
• Choice of injection during head movement: down; down-up; down + time; any point in the injection zone;
• Programmed languages: EN/ES/RU/PL;
• Setting the conveyor speed;
• Brine pressure: up to 4.5 bar (smooth adjustment);
• Continuous measurement of brine temperature

• Speed of the head during injection (smooth adjustment);
• Checking the moment and duration of injection;
• Ability to program conveyor speed;
• Lower and upper position of the injecting heads and the tenderizing head;
• Smooth adjustment of the height of the colliding beam;
• Programming of the elasticity of the needles depending on the injected raw material.


Intermik informs you that the machines presented on the website may differ from those offered due to design changes or individual customer requests.